Switch on or off
To switch on, press and hold the
power key for about 5 seconds. The
headset beeps, and the green
indicator light is displayed. The
headset tries to connect to the last
connected device.
To switch off, press and hold the
power key for about 2 seconds. The
headset beeps, and the red indicator
light is briefly displayed. If the
headset is not connected to a device
within about 30 minutes, it
switches off automatically.
Pair and connect the headset
1. Ensure that your mobile device
is switched on and the headset is
off.
2. Press and hold the power key (for
about 8 seconds) until the green
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
Bluetooth connectivity on the
mobile device, and set it to
search for Bluetooth devices.
4. Select the headset from the list
of found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device. In some
devices, you may need to make
the connection separately after
pairing.
When the headset is connected to
your device and is ready for use, the
green indicator light flashes slowly.
You can pair the headset with up to
eight devices, but you can connect
it to only one device at a time.
To manually connect the headset to
the last used device, switch the
headset off and on, or press and
hold the answer/end key for about 2
seconds.
You may be able to set your device
so that the headset connects to it
automatically. To activate this
feature in a Nokia device, change
the paired device settings in the
Bluetooth menu.
Calls
To make a call, use your mobile
device in the normal way when the
headset is connected to it.
To redial the number you last called
(if your device supports this feature
with the headset), when no call is in
progress, press the answer/end key
twice.
To activate voice dialling (if your
device supports this feature with
the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds.
Proceed as described in the user
guide of your device.
To answer or end a call, press the
answer/end key. To reject a call,
press this key twice.
To adjust the volume, press the
volume key up or down.
To mute or unmute the microphone,
press the middle of the volume key.
When the microphone is muted, the
green indicator light flashes twice
about every 5 seconds.
To switch a call from the headset to
a compatible device, press and hold
the answer/end key for about 2
seconds, or switch off the headset.
To switch the call back to the
headset, press and hold the answer/
end key for about 2 seconds, or
switch on the headset.
Turn lights on or off
By default, the indicator lights are
on in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a mobile
device) or back on, press and hold
the power key and the answer/end
key for about 2 seconds when the
headset is connected to a device.
Turning the lights off increases the
standby time.
Clear settings or reset
To delete the pairings from the
headset when it is switched off,
press and hold the power key and
the answer/end key (for about 6
seconds) until the red and green
indicator lights start to alternate.
To reset the headset if it stops
functioning, even though it is
charged, connect the headset to a
charger while you press and hold
the power key. The reset does not
clear the pairing settings.
