行至水穷处 坐看“云”起时

☁️时代应用交付

F5常见log日志解释

本文为复制内容,原文及可能的更新请查看原始文档

Log Messages List

 

ID Number Description
00020000 Resuming log processing at this invocation; held %d messages.
01010001 %s starting
01010004 Memory allocation failed: %s
01010007 “Config error: %s”
01010011 Persistence cookie hash failed
01010013 database size increased by %d bytes, %d total
01010019 Caught signal %d, exiting
01010020 MCP Connection %s, exiting
01010028 No members available for pool %s
01010029 Clock advanced by %u ticks
01010038 Syncookie counter %d exceeded vip threshold %u for virtual = %A:%d
01010044 “%s feature %s licensed”
01010045 Bandwidth utilization is %d Mbps, exceeded %d%% of Licensed %d Mbps
01010201 Inet port exhaustion on %*A to %*A%c%d (proto %d)
01010213 L3 Address LB method deprecated; using ‘Least Connections’ for pool %s
01010221 Pool %s now has available members
01010225 Failure to query dns-express db (%s)
01010231 DNSSEC: Did not add RRSIGs to response RR set (owner: %s)
01010235 Inet port find called for pg %d with invalid cmp state %x
01010239 LSN error: %s
01010240 Syncookie HW mode activated, server = %A:%d, HSB modId = %d
01010241 Syncookie HW mode exited, server = %A:%d, HSB modId = %d from %s
01010250 Pool member %A:%u exceeded configured rate limit.
01010251 Virtual %s exceeded configured rate limit.
01020037 The requested %s (%s) already exists
01020066 The requested %s (%s) already exists in partition %s
01060110 Lost connection to mcpd with error %d, will reinit connection.
01060111 Open SSL error – %s
01060136 Received links up – monitoring starts.
01070007 Received shutdown signal %d
01070069 Subscription not found in mcpd for subscriber Id %s.
01070147 Snatpool %s must reference at least one translation address.
01070151 Rule [%s] error: %s
01070261 Can’t create a home directory for username %s (%s)
01070265 The %s (%s) cannot be deleted because it is in use by a %s (%s)
01070277 The requested %s (%s) was not found
01070301 Pool (%s) is referenced by one or more virtual servers
01070320 Snatpool %s is still referenced by a virtual server.
01070340 %s (%s) is referenced by one or more rules
01070354 Self IP %s / %s: This network is defined on two vlans (%s and %s)
01070356 %s feature not licensed
01070392 Self IP %s / %s: This IP shares a network with %s (%s / %s).
01070394 %s in rule (%s) requires an associated %s profile on the virtual server (%s)
01070404 Add a new Publication for publisherID %s and filterType %p
01070406 Removed publication with publisher id %s
01070407 Removed information for Publication %s and filterType %p
01070408 Deleting abandoned subscriber connection for %s
01070410 Removed subscription with subscriber id %s
01070413 Updated existing subscriber %s with new filter class %llx
01070417 AUDIT – user %s – transaction #%u-%u – object %u – %s
01070418 connection %p (user %s) was closed with active requests
01070419 Platform initialization phase triggered
01070421 Base configuration initialization phase triggered.
01070424 Full configuration initialization phase triggered.
01070427 Initialization complete. The MCP is up and running
01070465 DB changed: %s, configsync needed
01070466 Received end of platform data
01070596 An unexpected failure has occurred, %s, exiting…
01070604 Cannot delete IP %s because it would leave a route unreachable.
01070608 License is not operational (expired or digital signature does not match contents)
01070622 The monitor %s has a wildcard destination service and cannot be associated with a node that has a zero service
01070638 “Pool %s member %s:%u monitor status %s.”
01070639 Pool %s member %s:%u session status %s.
01070640 Node %s address %s monitor status %s.
0107070e Software version not covered by service agreement. Reactivate license before continuing.
01070727 “Pool %s member %s:%u monitor status up.”
01070728 Node %saddress %s monitor status up.
01070730 Configuration restored from binary image
01070734 Configuration error: %s
01070736 Couldn’t write to the user/role/partition file, %s (%d)
01070737 Couldn’t rename the user/role/partition file from %s to %s (%d)
01070807 Monitor %s instance %s:%u has been %s.
01070823 Read Access Denied: %s
01070827 User login disallowed: %s
01070921 Virtual Server ‘%s’ on partition ‘%s’ %s by user ‘%s’.
01070927 Request failed, data provider (%s) disconnected from mcpd
01070978 The vlan (%s) for the specified self IP (%s) must be one of the vlans in the associated route domain (%s).
01070979 The specified vlan (%s) for route domain (%s) is in use by a self IP.
01071027 Master key OpenSSL error: %s
01071029 %s
0107102d Cannot load master key file. Updating to a new master key.
01071038 %s
01071047 Removing %d %s local objects from slot %d
01071070 Failed to %s file %s with error %d
01071246 “Unable to reload the dns cache\n”
01071392 Background command ‘%s’ failed. %s
010713b1 Cannot delete IP (%s) because it is used by the system state-mirroring (%s) setting.
010713c1 Initial management network proposals triggered (%s)
010713c2 No new proposal values detected
01071412 Cannot delete IP (%s) because it is used by the system config-sync setting.
0107142f Can’t connect to CMI peer %s, %s
01071430 Cannot create CMI listener socket on address %s, port %d, %s
01071431 Attempting to connect to CMI peer %s port %d
01071432 CMI peer connection established to %s port %d after %d retries
01071436 CMI listener established at %s port %d
0107143a CMI reconnect timer: %s
0107143c Connection to CMI peer %s has been removed
01071451 Received CMI hello from %s
01071470 Disconnecting from CMI device %s, the device is not in a trust domain
0107147f Could not read certificate file (%s)
01071488 Remote transaction for device group %s to commit id %llu %llu %s %llu failed with error %s
010714a0 Sync of device group %s to commit id %llu %llu %s %llu from device %s complete
01071539 Mcpd is starting. The BIG-IP version is %s
0107157D %s: %s
01071587 Commit ID message ignored, %s
0107167d Data publisher not found or not implemented when processing request %s.
01071681 SNMP_TRAP: Virtual %s has become available
01071682 SNMP_TRAP: Virtual %s has become unavailable
0107172d Policy ‘%s’ can’t be applied to virtual server ‘%s’ because it has no rules
01071912 %s in rule (%s) requires an associated %s profile on the %s (%s).
01071913 %s in rule (%s) under %s event at %s (%s) does not satisfy cmd/event/profile requirement
010719fd No IPv%s self IP exists on VLAN (%s) for static route (%s)
010c0009 Lost connection to mcpd – reestablishing
010c0018 Standby
010c0022 Opening %s for failover monitoring
010c002b Traffic group %s received a targeted failover command for %s.
010c002c Traffic group %s received a targeted failover command from cluster mate for %s.
010c002d Traffic group %s going standby via targeted failover command.
010c003b Bind fails on %s addr %s port %d error %s
010c003c Connect fails on %s addr %s port %d error %s
010c003e Offline
010c0044 Command: %s
010c0048 Bcm56xxd and lacpd connected – links up
010c0049 Tmm ready – links up.
010c0050 Sod requests links down
010c0052 Standby for traffic group %s
010c0054 Offline for traffic group %s.
010c0056 Deactivating traffic group %s
010c0057 Activating traffic group %s
010c005a Dropping a failover packet that is too small (%u)
010c005b Dropping a packet that is not a failover packet.
010c005e Waiting for mcpd to reach phase base, current phase is %s
010c005f Mcpd has reached phase base, current phase is %s
010c0063 Waiting for Mcpd without a response. Try again…
010c006a Configuration CRC values disagree amongst peers. Suggest configsync peers.
010c006b Configuration CRC values agree amongst peers
010c006c proc stat: [0] %s
010c006d %s.
010c006e All devices in traffic group %s %s have a HA group
010c0077 Listening for unicast failover packets on address %s port %d.
010c007e Not receiving status updates from peer device %s (Disconnected).
010c0083 No failover status messages received for %s seconds, from device %s (%s).
010c0084 Failover status message received after %s second gap, from device %s (%s).
010d0005 Chassis fan %d: status (%d) is bad
010d0006 Chassis power supply %d has experienced an issue. Status is as follows: %s
010d0009 %s: voltage (%d) is too high
010d0010 %s: fan speed (%d) is too low
010d0017 %s: milli-voltage (%d) is too low
010e0001 Cannot communicate with MCPD server
010e0002 Established new connection to MCPD server
010e0004 MCPD query response exceeding %d seconds
01100002 alertd is going down
01100017 Email action is failed for toaddress %s
01100042 Failed with MCPD at: %s (%s)
01100043 logcheck Notice: %s %d
01100049 logcheck Info: %s %d
01110001 Error running %s
01140029 HA %s %s fails action is %s
01140030 HA %s %s is now responding
01140043 Ha feature %s reboot requested
01140044 HA reports tmm ready
01140045 HA reports tmm NOT ready
01140100 Overdog daemon startup
01140101 Overdog daemon shutdown
01140102 Overdog daemon requests reboot
01140103 Watchdog touch enabled with %d seconds
01140104 Watchdog touch disabled
01140106 Overdog daemon calling bigstart restart
01150216 Notice from %s: %s
01160004 LACPD reporting error conditions
01160009 LACPD reporting a link being added to aggregation
01160010 LACPD reporting a link being removed from aggregation
01160011 LACPD reporting a churn condition
01160012 LACPD reporting a churn condition
01160016 LACP reporting an internal condition as informational message
01160024 %s
01180010 [license processing][error]: %s
011b0203 Error ‘%s’ opening file %s
011b020b Error ‘%s’ scanning buffer ‘%s’ from file ‘%s’
011b0309 %s %s %s
011b032e Graph ‘%s’ is not supported, possibly because it is not licensed, or a license has expired
011b0600 Error ‘%s’ during rrd_update for rrd file ‘%s’
011b0826 Cluster collection start error.Exitting
011b0900 TMSTAT error %s: %s
011b090c tmstat_query_rollup on table %s called
011b090e getTMValueUNKeyed start
011b0999 %s: %s
011d0002 No diskmonitor entries in database
011d0004 Disk partition %s has only %d free
011e0001 Limiting %s from %d to %d packets/sec for traffic-group %s
011e0002 %s: Aggressive mode %s %s (%llx) (%s %s). (%u/%u %s)
011e0003 Aggressive mode sweeper: %s (%llx) (%s %s) %d Connections killed
011f0001 %s: Bad chunk state %d
011f0005 HTTP header (%d) exceeded maximum allowed size of %d
011f0007 %s – Invalid action:0x%x %s (%C) %s (%C)
011f0008 %s – Invalid state transition to %s
011f0011 HTTP header count exceeded maximum allowed count of %d
01200009 Packet rejected remote IP %*A port %d local IP %*A port %d proto %s: Connection limit exceeded.
01200012 Warning, connections equals limit %K, proto %s, VS %s: Connection limit reached
01220001 TCL error: %s
01220002 Rule %s: %s
01220007 No pending rule event found for %K
01220009 Pending rule %s aborted for %K
01230002 Interface %d.%d: link is down
01230140 RST sent from %A:%d to %A:%d, %s
01260000 Profile %s: %s
01260006 Peer cert verify error: %s (depth %d; cert %s)
01260008 SSL transaction (TPS) rate limit reached
01260009 Connection error: %s:%d: %s (%d)
01260010 FIPS acceleration device failure: %s
01260012 Self-initiated renegotiation attempted while renegotiation disabled: %s
01260013 SSL Handshake failed for <PROTOCOL> <SRC> -> <DST>
01260014 Cipher %x:%x negotiated is not configured in profile %s
01260014 Cipher %x:%x negotiated is not configured in profile %s
01260015 Certificate supplied by server (subject CN: %s) was not configured on virtual: %s
01260017 Connection attempt to insecure SSL server (see RFC5746) aborted: %A:%d
01260018 Connection attempt to insecure SSL server (see RFC5746): %A:%d
01260025 Cipher %x:%x negotiated is not supported by Proxy SSL configured in virtual server %s
01280045 SAMPLE: stpd – Debug: Connected to BCM56XXD4 = 1
01290003 HALMSG reporting error conditions
012a0002 “LIBHAL reporting critical conditions”
012a0003 LIBHAL reporting error conditions
012a0004 LIBHAL reporting warning conditions
012a0005 LIBHAL reporting normal but significant condition
012a0006 LIBHAL reporting informational
012a0007 LIBHAL reporting debug-level messages
012a0013 Blade %d hardware sensor critical alarm: %s
012a0016 Blade %d hardware sensor notice: %s
012a0017 Chassis power module %d turned on
012c0004 Lost connection with MCP: %d … Exiting
012c0010 BCM56XXD driver error
012c0011 BCM56XXD SDK error
012c0012 BCM56XXD info
012c0013 BCM56XXD starting
012c0014 SAMPLE: bcm56xxd – Exiting…
012c0015 Link: %s is %s
012c0016 BCM56XXD SDK info
012d0007 Lost connection with MCP: %08x
012e0029 The configuration was successfully loaded.
01340002 HA Connection with peer %la:%d for traffic-group %s lost
01340003 Cluster error: %s
01340004 HA Connection detected dissimilar peer: local npgs %u, remote npgs %u, local npus %u, remote npus %u, local pg %u, remote pg %u, local pu %u, remote pu %u. Connection will be aborted.
01380002 Certificate ‘%s’ in file %s will expire on %s
013b0004 %s
013b0008 %s
013c0004 %s
013d0006 cand done
01420001 %s
01420002 SAMPLE: tmsh – AUDIT – pid=13324 user=root query_partitions=all update_partition=Common module=(tmos)# status=[Command OK] cmd_data=list ltm virtual idnshare3-139
01420003 “%s”
01420006 %s
01420007 Certificate ‘%s’ in file %s expired on %s
01420008 Certificate ‘%s’ in file %s will expire on %s
01420010 %s
01460005 SAMPLE: promptstatusd – mcpd.running(1) held, wait for mcpd
01460006 SAMPLE: promptstatusd – semaphore tmm.running(1) held
01460007 SAMPLE: promptstatusd – semaphore tmm.running(1) released
01470000 iSession: Connection error: %s:%u: %s:%d
01480002 %s
01480024 Can’t bind the flow, waiting for config response on channel %s
01490510 %s: Initializing Access with max global concurrent access session limit: %d
01490523 {{Access Profile, %s}{Partition, %s}{Session ID, %s}{Max Concurrent Sessions, %d}} “#0:#1:#2: Initializing Access with max global concurrent connectivity session limit: #3”
01490526 %s: Initializing Access with max global concurrent connectivity session limit: %d
01490541 Access using device name: %s and device ID: %.*s.
01490555 %s: Initializing Access with max global concurrent url filtering session limit: %d
014c0001 DIAMETER: %s error: %lE
014f0001 %s
014f0002 %s
014f0004 %s
014f000e Becoming primary cluster member
01530007 %s started ===============================
0153002c An instance of zxfrd (pid: %d) is already running! Exiting
01531003 Failed to sign zone transfer query for zone %s using TSIG key %s
0153100c Failed on receive of %d bytes for transfer of zone %s (%s)
0153100e Transfer of zone %s failed with rcode (%s)
01531010 Transfer of zone %s failed b/c there are no records
01531015 Failed to retrieve next RR in %s for zone %s
01531018 Failed to transfer zone %s from %s, will attempt %s
0153101b Ignoring NOTIFY for zone %s due IXFR in progress
0153101c Handling NOTIFY for zone %s
0153101f %s Transfer of zone %s from %s succeeded
01531023 Scheduling zone transfer in %ds for %s from %s
01531025 Serials equal (%d); transfer for zone %s complete
0153102a Failed connect callback to %s for transfer of zone %s
01531105 Zone %s expired. Zone will be unavailable until the next successful zone transfer
01531300 Cluster status changing from %s to %s
0153e0f7 Lost connection to mcpd
01570004 %s
015a0000 SAMPLE: devmgmtd – Initial trust configuration created
015c0004 %s
015c0009 IP Reputation has no license currently
01670003 Inbound entry %A,%d,%A,%A found
01670009 Inbound connection :%A,%d is active
01670010 Inbound entry:%A%%%d:%d, ds-lite remote:%A local:%A timeout:%d for key:%A%%%d:%d proto:%d added. ha mirrored: %s
01670019 “DNAT configuration: %s”
01670020 DNAT connection: %s
01670021 [%u.%u] LSN Pool %s has no usable translation address for DNAT
01690000 SAMPLE: evrouted – shutdown cleanly
016e0002 Execution of action ‘%.*s’ failed, error %E
01700000 PPTP CALL-REQUEST id;%d from;%A%%%u to;%A nat;%A%%%u ext-id;%d
01700001 PPTP CALL-START id;%d from;%A%%%u to;%A nat;%A%%%u ext-id;%d
01700002 PPTP CALL-END id;%d reason;%d from;%A%%%u to;%A nat;%A%%%u ext-id;%d
01700005 Error creating PPTP-GRE local flows, error %E.
018e0002 %s
018e0005 Exiting, received shutdown signal
点赞

发表评论

电子邮件地址不会被公开。 必填项已用*标注